Visual Circuits H-DVP Manual de usuario Pagina 365
- Pagina / 385
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
UM0036 STM8 C tutorial
Doc ID 7705 Rev 11 365/385
To make the trap interrupt occur more frequently:
1. Restart the application.
2. Locate the state variable in the Editor window (line 132).
3. Place the cursor on the state variable.
4. Select Edit>QuickWatch to view it in the QuickWatch window.
In the QuickWatch window change the timeoutValue value for elements 0, 1 and 2 of
this array to a lower value (for example 200).
Figure 298. QuickWatch
Then select Debug Instrument>Performance Analysis and click on Continue to execute
the program (do not click on Run because you would reset the chip and lose the values
previously set). The results of the performance analysis appear much more quickly.
1. Select Debug>Stop Debugging from the main menu.
2. Select File>Close Workspace to close the workspace. The current workspace is
closed and automatically saved.
Figure 299. New performance analysis results
- User Manual 1
- Contents 2
- Doc ID 7705 Rev 11 3/385 3
- 4/385 Doc ID 7705 Rev 11 4
- Doc ID 7705 Rev 11 5/385 5
- 6/385 Doc ID 7705 Rev 11 6
- Doc ID 7705 Rev 11 7/385 7
- 8/385 Doc ID 7705 Rev 11 8
- UM0036 Contents 9
- List of tables 10
- List of figures 12
- Doc ID 7705 Rev 11 13/385 13
- 14/385 Doc ID 7705 Rev 11 14
- Doc ID 7705 Rev 11 15/385 15
- 16/385 Doc ID 7705 Rev 11 16
- Doc ID 7705 Rev 11 17/385 17
- 1 Introduction 18
- ICD configuration 20
- 1.4 Getting assistance 21
- 1.5 Associated documentation 21
- 1.6 Conventions 22
- 2 Getting started with STVD 23
- 2.2.1 Create a new workspace 24
- Doc ID 7705 Rev 11 25/385 25
- 26/385 Doc ID 7705 Rev 11 26
- 2.4 Build your application 28
- Doc ID 7705 Rev 11 29/385 29
- 30/385 Doc ID 7705 Rev 11 30
- 2.6 Debug your application 32
- Doc ID 7705 Rev 11 33/385 33
- 34/385 Doc ID 7705 Rev 11 34
- Status bar 35
- File menu 36
- Edit menu 36
- View menu 37
- Project menu 37
- Build menu 38
- Debug menu 38
- Debug instrument menu 38
- Tools menu 38
- Window menu 39
- Help menu 39
- 3.3 View windows 40
- 3.4 Workspace window 41
- Workspace contextual menus 42
- 3.5 Editor windows 43
- Supported file types 44
- Doc ID 7705 Rev 11 45/385 45
- File folding 46
- Margin features 46
- Doc ID 7705 Rev 11 47/385 47
- Editor status bar information 48
- Editor window positioning 48
- 3.5.2 Editing features 49
- Syntax highlighting 50
- Auto-completion 50
- Parameter information 50
- Indentation 51
- Brace matching 52
- Find features 52
- Find pull-down list 53
- Find in files 54
- Regular expressions 55
- 3.6 Output window 56
- Doc ID 7705 Rev 11 57/385 57
- 3.6.3 Debug tab 58
- 3.6.4 Console tab 58
- Doc ID 7705 Rev 11 59/385 59
- Edit/Debug tab 62
- 3.7.2 Customizing toolbars 65
- Moving toolbars 66
- Rearranging toolbar icons 67
- 3.7.3 Adding custom commands 67
- 68/385 Doc ID 7705 Rev 11 68
- 3.8 Tooltips 69
- Generate support file 70
- Doc ID 7705 Rev 11 71/385 71
- 7 steps to full migration 72
- 4 Project creation and build 75
- Toolset path information 76
- Opening a .stw workspace 77
- Create an empty workspace 78
- Doc ID 7705 Rev 11 79/385 79
- 4.3.2 Creating new projects 80
- Doc ID 7705 Rev 11 81/385 81
- 82/385 Doc ID 7705 Rev 11 82
- Adding folders 83
- Adding files 83
- 84/385 Doc ID 7705 Rev 11 84
- 4.5.1 General settings tab 85
- 4.5.2 Debug settings tab 86
- 4.5.3 MCU selection tab 86
- 4.5.4 Pre-link settings tab 87
- 88/385 Doc ID 7705 Rev 11 88
- 4.6.1 ST ASM tab 89
- 4.6.2 ST Link tab 90
- Modify the segment mapping 91
- Output filename 91
- Libraries 91
- 4.6.3 ST Post-Link tab 92
- Doc ID 7705 Rev 11 93/385 93
- 94/385 Doc ID 7705 Rev 11 94
- 4.7.1 Cosmic C compiler tab 95
- Debug information 97
- Compiler messages display 98
- 100
- Doc ID 7705 Rev 11 105/385 105
- 106/385 Doc ID 7705 Rev 11 106
- 4.7.2 Cosmic C Assembler tab 107
- 108/385 Doc ID 7705 Rev 11 108
- 4.7.3 Cosmic C linker tab 110
- Doc ID 7705 Rev 11 111/385 111
- 112/385 Doc ID 7705 Rev 11 112
- Doc ID 7705 Rev 11 113/385 113
- 114/385 Doc ID 7705 Rev 11 114
- Doc ID 7705 Rev 11 117/385 117
- 118/385 Doc ID 7705 Rev 11 118
- C language 119
- Listings 119
- Optimizations 119
- Global variables 120
- Generate debug info 120
- User-defined options 120
- Program model (STM8 only) 120
- Doc ID 7705 Rev 11 121/385 121
- Generate only small objects 122
- Doc ID 7705 Rev 11 125/385 125
- 128/385 Doc ID 7705 Rev 11 128
- Doc ID 7705 Rev 11 129/385 129
- ● Generate map file 130
- ● User defined options 130
- Doc ID 7705 Rev 11 131/385 131
- 132/385 Doc ID 7705 Rev 11 132
- Doc ID 7705 Rev 11 133/385 133
- Compiler memory models 134
- Message Display 135
- Debug info 135
- C Language 136
- Preprocessor definitions 136
- Extra include paths 139
- Extra include files 140
- Message display 145
- Output filename options 149
- Strip debug information 149
- Object/Lib modules 150
- Library paths 150
- Vector file name field 155
- ● Custom build tab 156
- ● Build commands 156
- 4.10.2 Custom build tab 157
- 4.12 Build commands 158
- Table 57. Build commands 159
- 5 Basic debugging features 160
- ● and Add communication ports 161
- Doc ID 7705 Rev 11 163/385 163
- 5.2.1 Memory map 164
- 5.2.2 On-chip peripherals 166
- 5.3 Running an application 167
- 5.3.2 Stepping modes 168
- 5.4 Editor debug actions 169
- Editor contextual menu 170
- Watch pop-up 171
- 5.4.1 Editor debug margin 172
- Margin icons 172
- Doc ID 7705 Rev 11 173/385 173
- 5.4.2 QuickWatch window 174
- 5.5 Disassembly window 175
- 176/385 Doc ID 7705 Rev 11 176
- Doc ID 7705 Rev 11 177/385 177
- 5.6 Online assembler 178
- Doc ID 7705 Rev 11 179/385 179
- 5.7 Memory window 180
- 5.7.2 Viewing features 181
- 182/385 Doc ID 7705 Rev 11 182
- 5.8 Instruction breakpoints 183
- 184/385 Doc ID 7705 Rev 11 184
- 5.8.4 Showing breakpoints 185
- 5.9 Data breakpoints 186
- Doc ID 7705 Rev 11 187/385 187
- 5.10 Call stack window 188
- Doc ID 7705 Rev 11 189/385 189
- 5.12 Watch window 191
- 5.13 Core registers window 192
- Doc ID 7705 Rev 11 193/385 193
- 5.14 MSCI tools window 194
- 5.15 Symbols browser 195
- 196/385 Doc ID 7705 Rev 11 196
- Doc ID 7705 Rev 11 197/385 197
- 5.17 Memory trace window 198
- 5.18 Online commands 199
- 5.18.6 The help command 200
- General debug limitations 201
- 6 Simulator features 202
- Doc ID 7705 Rev 11 203/385 203
- 204/385 Doc ID 7705 Rev 11 204
- Periodic signal example 205
- 206/385 Doc ID 7705 Rev 11 206
- Using your stimuli file 207
- 208/385 Doc ID 7705 Rev 11 208
- 6.3.2 Plotter window 209
- Display tabs 210
- Name column 211
- Value column 212
- Navigating in the plot 213
- Modifying expressions 217
- 218/385 Doc ID 7705 Rev 11 218
- Printing a plot 219
- 220/385 Doc ID 7705 Rev 11 220
- 6.5 Forcing interrupts 221
- 224/385 Doc ID 7705 Rev 11 224
- 7.1.2 Selecting your MCU 225
- Options tab 226
- 7.2.2 Hardware breakpoints 229
- 230/385 Doc ID 7705 Rev 11 230
- Doc ID 7705 Rev 11 231/385 231
- 232/385 Doc ID 7705 Rev 11 232
- Doc ID 7705 Rev 11 233/385 233
- Stack limitation (ICC only) 234
- Doc ID 7705 Rev 11 235/385 235
- ST7FLCD1 FF00 - FFDF 235
- ST7FMC2 FF00 - FFDF 235
- ST72F325 FF00 - FFDF 235
- SWIM debugger limitation 236
- 8.2 Using hardware events 237
- 238/385 Doc ID 7705 Rev 11 238
- Doc ID 7705 Rev 11 239/385 239
- 240/385 Doc ID 7705 Rev 11 240
- Doc ID 7705 Rev 11 241/385 241
- 8.3 Trace recording 242
- Show/hide columns 243
- Move columns 244
- Line filter 244
- Saving trace to file 244
- 8.3.2 Viewing trace contents 245
- 8.4 Using hardware testing 246
- Doc ID 7705 Rev 11 247/385 247
- 248/385 Doc ID 7705 Rev 11 248
- To define an event: 249
- 250/385 Doc ID 7705 Rev 11 250
- To define an advanced break: 251
- 252/385 Doc ID 7705 Rev 11 252
- Doc ID 7705 Rev 11 253/385 253
- Setting the stack control 254
- Doc ID 7705 Rev 11 255/385 255
- 256/385 Doc ID 7705 Rev 11 256
- Doc ID 7705 Rev 11 257/385 257
- 9 STice features 258
- Doc ID 7705 Rev 11 259/385 259
- 260/385 Doc ID 7705 Rev 11 260
- Doc ID 7705 Rev 11 261/385 261
- 9.1.2 Trace contextual menu 262
- Doc ID 7705 Rev 11 263/385 263
- 264/385 Doc ID 7705 Rev 11 264
- 9.1.3 Emulator commands 265
- 9.2 Coverage and profiling 266
- Doc ID 7705 Rev 11 267/385 267
- STice features UM0036 268
- Doc ID 7705 Rev 11 269/385 269
- Doc ID 7705 Rev 11 271/385 271
- Code coverage and profiling 272
- Functions/Instructions View 272
- Doc ID 7705 Rev 11 273/385 273
- Data View 274
- Source View 275
- 276/385 Doc ID 7705 Rev 11 276
- Doc ID 7705 Rev 11 277/385 277
- Detecting dead code 279
- Monitoring stack space usage 279
- Optimizing variables 280
- Doc ID 7705 Rev 11 281/385 281
- 282/385 Doc ID 7705 Rev 11 282
- UM0036 STice features 283
- 10 EMU3 emulator features 284
- Doc ID 7705 Rev 11 285/385 285
- 10.1.2 Trace contextual menu 286
- Filter lines 287
- Selecting the Timestamp unit 288
- Goto Source, Goto Disassembly 288
- Bookmarks 289
- Column display 289
- 10.1.3 Emulator commands 290
- Doc ID 7705 Rev 11 291/385 291
- 292/385 Doc ID 7705 Rev 11 292
- Doc ID 7705 Rev 11 293/385 293
- 294/385 Doc ID 7705 Rev 11 294
- Doc ID 7705 Rev 11 295/385 295
- 10.2.2 Memory access events 296
- Doc ID 7705 Rev 11 297/385 297
- 298/385 Doc ID 7705 Rev 11 298
- Doc ID 7705 Rev 11 299/385 299
- 10.2.3 Other types of events 300
- Doc ID 7705 Rev 11 301/385 301
- 302/385 Doc ID 7705 Rev 11 302
- Doc ID 7705 Rev 11 303/385 303
- 304/385 Doc ID 7705 Rev 11 304
- Doc ID 7705 Rev 11 305/385 305
- 306/385 Doc ID 7705 Rev 11 306
- 10.6 Performance analysis 319
- 320/385 Doc ID 7705 Rev 11 320
- 10.6.3 Viewing results 321
- 322/385 Doc ID 7705 Rev 11 322
- 10.7 Read/write on the fly 323
- 324/385 Doc ID 7705 Rev 11 324
- 11 Program 325
- The programming mode 326
- Protections 327
- RC Calibration values 327
- Unlock device 328
- Doc ID 7705 Rev 11 329/385 329
- 330/385 Doc ID 7705 Rev 11 330
- UM0036 Program 331
- 12 STM8 C tutorial 332
- 12.1 Setup 333
- 12.1.2 Create a workspace 334
- 12.1.3 Create a project 334
- Doc ID 7705 Rev 11 335/385 335
- 336/385 Doc ID 7705 Rev 11 336
- 12.1.4 Add the source files 337
- 338/385 Doc ID 7705 Rev 11 338
- 12.2 Build 339
- 340/385 Doc ID 7705 Rev 11 340
- Doc ID 7705 Rev 11 341/385 341
- 342/385 Doc ID 7705 Rev 11 342
- 12.2.4 Build the application 343
- 12.3 Start debugging 344
- Activate a feature 345
- 346/385 Doc ID 7705 Rev 11 346
- 12.4 Instruction breakpoints 347
- 348/385 Doc ID 7705 Rev 11 348
- Doc ID 7705 Rev 11 349/385 349
- 350/385 Doc ID 7705 Rev 11 350
- 12.5 View execution 351
- 352/385 Doc ID 7705 Rev 11 352
- Doc ID 7705 Rev 11 353/385 353
- 354/385 Doc ID 7705 Rev 11 354
- 12.6 Perform memory mapping 355
- 356/385 Doc ID 7705 Rev 11 356
- \tutorial_cosmic\ 356
- Doc ID 7705 Rev 11 357/385 357
- 358/385 Doc ID 7705 Rev 11 358
- Doc ID 7705 Rev 11 359/385 359
- 360/385 Doc ID 7705 Rev 11 360
- Doc ID 7705 Rev 11 363/385 363
- 364/385 Doc ID 7705 Rev 11 364
- Doc ID 7705 Rev 11 365/385 365
- 366/385 Doc ID 7705 Rev 11 366
- Doc ID 7705 Rev 11 367/385 367
- 368/385 Doc ID 7705 Rev 11 368
- Doc ID 7705 Rev 11 369/385 369
- 13.5 Project settings 370
- Doc ID 7705 Rev 11 371/385 371
- 372/385 Doc ID 7705 Rev 11 372
- Applying project settings 374
- Doc ID 7705 Rev 11 375/385 375
- 376/385 Doc ID 7705 Rev 11 376
- Appendix A Product support 377
- 378/385 Doc ID 7705 Rev 11 378
- Revision history 379
- Revision history UM0036 380
- 381/385 Doc ID 7705 Rev 11 381
- 382/385 Doc ID 7705 Rev 11 382
- 383/385 Doc ID 7705 Rev 11 383
- 384/385 Doc ID 7705 Rev 11 384
- Doc ID 7705 Rev 11 385/385 385
Relacionado con productos y manuales para Servidores Visual Circuits H-DVP
Servidores Visual Circuits H-DVP Manual de usuario
(16 paginas)
(16 paginas)
Servidores Visual Circuits H-DVP Manual de servicio
(36 paginas)
(36 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.103 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales